73
7
Tape Controls
StudioLive™ Series III
7.1
Pairing a Bluetooth Device
Owner’s Manual
7 Tape Controls
磁带控制装置
By default, the Tape channel is sourced from the analog Tape In jacks on the rear
of the mixer and the currently paired Bluetooth audio device simultaneously.
The two signals are mixed together and summed on the Tape In channel.
A note to StudioLive 32SX and 32SC users:
Bluetooth audio is not available on
these models.
If you prefer, you can instead route audio from a connected network device,
computer connected via USB, or from tracks 33-34 in a Capture session stored on
an inserted SD card.
默认情况下，
Tape channel
的信号来自调音台后部的模拟
Tape In jacks
接口，
和当前配对的蓝牙音频设备，同时。这两个信号被混合在一起，并在磁带
输入通道上相加。
请注意
StudioLive 32SX
和
32SC
用户：
蓝牙音频在这些型号上是不可用的。
如果你愿意，你可以从连接的网络设备、
USB
连接的计算机、或从存储在插
入
SD
卡上的
Capture
会话中的音轨
33-34
，进行路由音频。
To configure the tape input options, press the
Edit
button in the Tape control area,
next to the Touch Display.
要配置磁带输入选项，请按磁带控制区的
Edit
按钮，在
Touch Display
旁边。
The Tape Edit screen is displayed. Here, you can choose a signal to be routed to the
Tape input channel from the following options:
"Tape Edit"
显示，你可以从以下选项中选择一个信号被路由到
Tape input
通道。
• Analog/BT.
Touch this button to route both the Tape input jacks and the currently
selected paired Bluetooth device to the Tape input channel. When selected, two
slots are shown for paired Bluetooth devices. Touch the button that relates to your
choice of device to route its audio output to the Tape input channel. A Forget
Devices button is provided to break pairing connections, allowing you to pair
another device, or to work out pairing issues with a device that doesn’t seem to
function.
Bluetooth audio is not available on the StudioLive 32SX and 32SC.
触控此按钮可将
Tape input jacks
和当前选定的配对蓝牙设备，全部路由到
Tape input channel
通道。选择时，两个插槽会显示为配对的蓝牙设备。触控你
所选设备的相关按钮，将其音频输出路由到
Tape input channe
通道。提供一
个
Forget Devices
设备的按钮，可中断配对连接，允许你配对另一个设备，或
者解决与一个似乎不起作用的设备的配对问题。蓝牙音频在
StudioLive 32SX
和
32SC
上不可用。
• Network.
Touch this button to use audio from the designated network tape
channels as the local tape input source. For more information
seeSection 5.4.1
.
此按钮可使用指定网络磁带通道的音频作为本地磁带输入源。
更多信息
见第
5.4.1
节
。
• USB.
Touch this button to route audio from a USB-connected computer to the
Tape input channel. Once selected, USB streams 37 and 38 will be available as the
tape source. For more information on USB audio routing,
see Section 6.10.3
.