62
6
The Fat Channel
StudioLive™ Series III
6.8
Fat Channel Screens
Owner’s Manual
Note:
Because the StudioLive 64S employs the quad-core FLEX DSP engine, any of the first
32 channels can be used a Key Source for channels 1-32 while any of the second 32
channels can be used as a Key Source for channels 33-64.
注意：由于
StudioLive 64S
采用了四核
FLEX DSP
引擎，前
32
通道中的任何一个都
可以作为通道
1-32
的音源，而后
32
通道中的任何一个都可以作为通道
33-64
的音
源。
6.8.4.2
Tube Leveling Amplifier Overview Screen
When the Fat Channel is in Tube Compressor mode, the Touch Display shows an
overview screen that displays the relevant parameters. Touching any onscreen knob
allows you to use the Master Control encoder to set the selected parameter. Touching
a drop-down selector (such as Key Source) lets you select from a list of relevant
choices. Use the Master Control encoder to scroll through choices. Touching onscreen
buttons toggles the related parameter on or off.
当
Fat Channel
处于
Tube Compressor
模式时，触屏会显示一个概览图像的相关参
数。触屏幕上的任何旋钮，可以使用
Master Control
编码器来设置所选参数。触
控下拉选择器（如键源）可以从相关的选择列表中选择。使用
Master Control
编
码器滚动选择。触屏上的按钮，可以打开或关闭相关参数。
Power User Tip:
For StudioLive models with dynamic Fat Channel displays, many of these
parameters can also be controlled from the encoders and buttons in the Fat Channel.
See
Section 6.5.2 for details
.
Power User Tip:
带有动态
Fat Channel
显示的
StudioLive
型号，许多参数可以通过
Fat
Channel
的编码器和按钮来控制。详情见第
6.5.2
节。
1.
Processor On/Off.
Enables or disables the Compressor.
启动或禁用
Compressor
。
2.
Comp / Limiter.
Switches between the compressor and limiter modes.
在压缩
器和限制器模式之间切换。
3.
Gain.
Sets the input gain to the compressor.
设置压缩器的输入增益。
4.
VU Meter.
Displays the post-Compressor signal level.
显示压缩后的信号电平。
5.
Peak Reduction.
Sets the amount of peak reduction to apply to the signal.
设置
应用于信号源的峰值减少量。
6.
Key Filter.
Sets the Key Filter frequency.
设置
Key Filter
键噪滤波频率。
7.
Key Listen.
Touch to enable the Key Listen function.
触控启用
Key Listen
功能。
8.
Key Source (Input Channels only).
Sets the Key Source for the Compressor.
设
置
Compressor
的
Key Source
键源。
Note:
Because the StudioLive 64S employs the quad-core FLEX DSP engine, any of the first
32 channels can be used a Key Source for channels 1-32 while any of the second 32
channels can be used as a Key Source for channels 33-64.
注意：
StudioLive 64S
采用四核
FLEX DSP
引擎，前
32 channels
中的任何一个都可以作
为通道
1-32
的音源，而后
32 channels
中的任何一个都可以作为通道
33-64
的音源。
