28
5
Basic Controls
5.2
Aux and FX Buses
StudioLive™ 16.0.2 USB
Owner’s Manual
5.2.2
Internal FX Bus Controls
Just to the right of the Fat Channel, you will find the master bus controls for the two
internal effects buses, EFX A and EFX B:
Internal Effects Bus Select Button. Enables Fat Channel Viewing.
The Select button brings the Fat channel for its Effects Bus into
focus, allowing you to add dynamics processing and EQ.
Main Assign Button. Assigns/Unassigns FX bus to Main Output.
This button will route its internal effects (EFX) bus to the Main output.
It will illuminate yellow when the bus is patched to the Mains. To
mute the effect bus in the Main output, simply unassign it.
Aux Assign Button. Assigns/Unassigns FX bus to Aux 1-4.
This button will route its internal effects (EFX) bus to all four Aux
outputs. It will illuminate yellow when the bus is patched to the aux
buses. To mute the effect bus in the auxes, simply unassign it.
FX Level Control. Adjusts the Master Level of the Effects Send Mix.
This knob controls the overall output level of the internal effects mix.
5.2.3
Aux and FX Bus Channel Sends
In addition to setting the dynamics for each channel and bus, and metering each
channel and output, the Fat Channel allows you to create aux mixes and quickly view
the send level for each channel.
The Encoder Mode buttons to the left of the Fat Channel are used
for this purpose. Each of these buttons allows you to view and
set the send level for each channel to that aux or FX mix.
FXA and FXB Encoder Mode Buttons. Enables FXA
or FXB Bus Mixing in the Fat Channel.
When one of these buttons is enabled, the 12 encoders in the Fat Channel become
the FX-send level controls for each of their respective input channels to the enabled
bus (FXA or FXB). The meters will display the send amount of each of the input
channels. The encoders for the stereo channels set the send level for both the Left
and the Right input, provided that stereo linking is enabled.
See Section5.1 for details
.
Aux 1-4 Encoder Mode Buttons. Enables Aux Mixing in the Fat Channel.
When any of these button is enabled, the 12 encoders in the Fat Channel become the
aux-send level controls for each of their respective input channels to enabled Aux
bus (Aux 1-4). The meters will display the send amount of each of the input channels.
The encoders for the stereo channels set the send level for both the Left and the
Right input, provided that stereo linking is enabled.
See Section 5.1 for details
.
When an Aux pair is Stereo linked, the Aux 2 and Aux 4 buttons enable pan
control for each channel in the Aux pair, and the 12 encoders in the Fat Channel
become the pan controls for each of their respective input channels. The meters
will display the pan setting of each of the input channels. Use Aux 1 and Aux 3
Encoder mode buttons to set the send level of each channel to the aux pair.
Summary of Contents for StudioLive 16.0.2 USB
Page 4: ......
