12
4
The Fat Channel
4.1
The Select Button
StudioLive™ 16.0.2 USB
Owner’s Manual
4
The Fat Channel
The revolutionary Fat Channel is the heart of the StudioLive. The Fat Channel
makes dynamics, routing, and panning for every input and output on the
StudioLive available at the touch of a Select button. The 12 multipurpose
knobs and meters located in the Fat Channel control nearly every adjustment
you will need to make on your StudioLive. From the Fat Channel, you can:
4
Add dynamics processing and EQ to every input and output
4
Create aux and effects mixes for all four analog aux
buses and both internal effects buses
4
Engage phantom power for each mic preamp.
4
Meter input level and gain reduction for all 16 channels
4
Meter output level for all four aux buses and the Main output
4
Copy, save, and load Fat Channel and GEQ presets
4
Recall your fader position for stored mixes
4.1
The Select Button
Select Buttons. Above each fader and in both FXA and FXB master sections, you will
find Select buttons. There is a Select button on each of the 12 channels, each of the 4
analog aux buses, both internal effects buses, and the main output bus. Each of
these buttons serves the same purpose: to access the Fat Channel parameters for its
channel or bus.
Selected Channel Display. In the lower right corner of the Fat Channel, you will find
an LED readout. The currently selected channel will always be displayed here as
follows:
4
Numbers 1-8:
The corresponding mono channel (1-8) is selected.
4
9, 11, 13, or 15:
The corresponding stereo channel (9/10 – 15/16) is selected.
4
MA:
Main bus is selected.
4
A1-A4:
The corresponding Aux bus (1-4) is selected.
4
Fa:
EFX A is selected.
4
Fb:
EFX B is selected.
Summary of Contents for StudioLive 16.0.2 USB
Page 4: ......
