6
2
Getting Started
2.1
Level Setting Procedure
StudioLive™ 16.0.2 USB
Owner’s Manual
9. Speak or sing into your microphone at approximately the
same volume you expect during the performance.
10. Turn the trim knob on Channel 1 clockwise while watching the first meter in the
Fat Channel.
11. Adjust the Channel 1 trim knob until a little more than half of the green LEDs are
lit. The red LED at the top of the meter should never light up.
12. Raise the Channel 1 fader until it reaches “U” (unity gain).
13. Bring up the Main fader until you can comfortably listen to your microphone
through your speakers.
14. Press the Channel 1 Select button.
15. Use the Fat Channel to add dynamics processing and EQ.
Summary of Contents for StudioLive 16.0.2 USB
Page 4: ......
