34
5
Basic Controls
5.6
Solo Bus
StudioLive™ 16.0.2 USB
Owner’s Manual
5.6.1
Using the Solo Bus for Monitoring
When mixing live, or when recording multiple musicians at once, it is often
necessary to quickly listen in on just one instrument or group. The Solo
and Monitor buses can be used together for this purpose. It is important to
note that if you wish to monitor with speakers, rather than headphones, it
is necessary to connect the speakers to the Control Room outputs on the
back of your StudioLive rather than to one of the main output pairs.
First decide whether you want to listen to your soloed channels
before or after the fader setting. If you’d like to monitor before the
fader level, press the PFL button in your Solo bus section.
1. Next, press the Solo Mode button.
2. Press the MultiMode mode buttons on the channels and auxes you want to
monitor.
3. Turn the Solo Level knob in the Solo section to about 12 o’clock.
4. Press the Solo button in the monitor bus section.
5. Using the Headphone or Monitor Level controls, dial in a comfortable listening
volume.
Summary of Contents for StudioLive 16.0.2 USB
Page 4: ......
