10
2
Studio One
2.5
Automation Controls
FaderPort™ 8
Owner’s Manual
2.4.1
Function Buttons
Using Shift plus any other Session Navigator buttons will access the Function buttons
for your FaderPort 8. By default, the Function buttons are assigned as follows:
•
F1. Open Inspector
•
F2. Open Editor
•
F3. Open Mixer
•
F4. Open Browser
•
F5. Open Scratch Pad
•
F6. Open Tempo Track
•
F7. Open Arranger Track
•
F8. Open Marker Track
Power User Tip:
The default assignments for the Function buttons can be customized
using the FaderPort 8 device editor.
See Section 2.6.2
for more information.
2.5
Automation Controls
The Automation controls provide access to the automation modes for the currently
selected channel. Holding the Shift button will provide access to additional functions.
3
4
2
5
1
6
1. Latch / Save. Engages Latch Automation on currently selected track. Press
the SHIFT and Latch buttons simultaneously to save your session.
2. Trim / Redo. At this time, Trim Automation is not available in Studio One.
Press the SHIFT and Trim buttons simultaneously to redo the last action.
3. Off / Undo. Turns Automation off on currently selected track. Press
the SHIFT and Off buttons simultaneously to undo the last action.
4. Read / User 3. Engages Read Automation on currently selected
track. Press the SHIFT and Read buttons simultaneously to engage
the User 3 function.
See Section 2.5.1
for more information.
5. Write / User 2. Engages Write Automation on currently selected
track. Press the SHIFT and Write buttons simultaneously to engage
the User 2 function.
See Section 2.5.1
for more information.
6. Touch / User 1. Engages Touch Automation on currently selected
track. Press the SHIFT and Touch buttons simultaneously to engage
the User 1 function.
See Section 2.5.1
for more information.
2.5.1
User buttons
By default, the three User buttons are set as follows:
•
User 1. Show/Hide Automation
•
User 2. Snap to Grid
•
User 3. Autoscroll On/Off
User buttons can be reassigned from the FaderPort 8
Control Link window.
See Section 2.6.2
.
Summary of Contents for FaderPort 8
Page 1: ...FaderPort 8 8 channel Production Controller Owner s Manual www presonus com English...
Page 4: ......
Page 62: ......
