PRESONUS FaderPort 8, Owner'S Manual

Page: 39 / 64

35
6 Cubase / Nuendo (MCU)
6.4 The Session Navigator
FaderPort™ 8
Owner’s Manual
6.4 The Session Navigator
The Session Navigator provides quick navigation controls. Each button alters the
functions of the push-button encoder and the Next and Prev buttons on either side.
Note: At the time this manual was written, F1-F8 Functions are not available in Cubase
or Nuendo.
2 1 4 3 6 5 8 7
1. Channel. Encoder and navigation buttons switch between
the left and right side of stereo channels.
2. Master. The Encoder controls the Master bus level.
3. Zoom. Encoder controls horizontal zooming.
Navigation buttons control vertical zooming.
4. Click. Press to add a new marker at the current playback position.
5. Scroll. Press once to enable scrubbing control with the encoder
and navigation buttons. Press twice to enable timeline scrolling
control with the encoder and navigation buttons.
6. Section. The Encoder will control Timeline scrolling.
Navigation buttons control rewind and fast forward.
7. Bank. Encoder and navigation buttons scroll through channels in banks of eight.
8. Marker. Press to return to zero.
6.5 Automation Controls
3
4
2
5
1
6
1. Latch / Save. Opens Mixer view. Press the SHIFT and Latch
buttons simultaneously to save your session.
2. Trim / Redo. Opens Sends view. Press the SHIFT and Trim
buttons simultaneously to redo the last action.
3. Touch/ Undo. Touch automation is not available for Cubase / Nuendo.
Press the SHIFT and Off buttons simultaneously to undo the last action.
4. Read. Engages Read Automation on currently selected track. Press
again to turn automation off on currently selected track.
5. Write. Engages Write Automation on currently selected
track. Press again to engage Read Automation.
6. Touch. Brings Arrangement to front when Mixer window is active.
Note: At the time this manual was written, User modes are not available in Cubase
or Nuendo.