19
4
Logic (MCU)
4.1
Getting Started
FaderPort™ 8
Owner’s Manual
4
Logic (MCU)
4.1
Getting Started
When you first power on your FaderPort 8, you will be given the
opportunity to select which mode of operation you’d like to use. To use
the FaderPort 8 with Logic, select Mackie Control Universal (MCU).
Mackie Control. Select Mackie Control by pressing the
Select button below its scribble strip label.
Once you have selected MCU mode, press the Select button below the “Exit” screen
to reboot your FaderPort. Once you have set the operation mode, your FaderPort 8
will retain this information.
If you would like to change the mode at any point, power on the unit while
holding down the first two Select buttons.
Power User Tip:
From this menu, you can also adjust the fader sensitivity and speed to
fine tune your FaderPort 8 to work the way you want. Please
see Section 9
for more
information on the customized setup modes.
The FaderPort 8 is a class-compliant device in both macOS® and Windows®.
Simply connect your FaderPort 8 to a free USB port on your computer. No further
installation is necessary.
Summary of Contents for FaderPort 8
Page 1: ...FaderPort 8 8 channel Production Controller Owner s Manual www presonus com English...
Page 4: ......
Page 62: ......
