Preparing
the tacker
22
ATTENTION
Damaged hoses can burst and cause property damage due to
escaping compressed air.
Check the compressed air system and the tacker for damage
before connecting.
Connect the tacker only to a functioning compressed air
system.
Slide the quick-connect lock (1) on the compressed air hose onto
the connector (2) until it audibly engages.
Check the operating pressure at the pressure gage on the
compressor.
The maximum permissible operating pressure for tackers
1A-
AK16BNH and 4C-WZ38BNH/4C-WZ38BNH400 is 8.3 bar.
WARNING
Risk of explosion if maximum operating
pressure is exceeded.
In this case, disconnect the air hose from the tacker
immediately.
Summary of Contents for 1A-AZ16BNH
Page 28: ...Eintreibger t bedienen 4C WZ38BNH 4C WZ38BNH400 28...
Page 47: ...Nach dem Betrieb 47 Schlie en Sie das Magazin siehe Seite 29...
Page 117: ...After operation 47 Close the magazine see page 28...
Page 137: ...Technical data 67 Noise characteristics per DIN 12549 1999 LWA 1s 95 3 dB LpA 1s 82 3 dB...
