Prebena 1A-AZ16BNH, Instructions For Use Manual

Page: 102 / 144

Tacker operation 4C-WZ38BNH / 4C-WZ38BNH400
32
The device must not be used in the following cases:

For applications that require the tacker to be moved across
scaffolding, stairs, ladders, or ladder-like structures.

For closing crates or boxes.

For applying transport locks.
Set drive depth
You can set the drive depth of the fastener into the carton material by
adjusting the bottom retaining clip and by controlling the operating
pressure.
Controlling operating pressure
You can set the drive depth of the fastener into the material by
controlling the operating pressure. At higher operating pressure, the
fasteners are driven deeper, and at lower operating pressure they are
driven less deep.

When operating with a compressed air hose, you can only
turn up the operating pressure on the tacker to a maximum of
the output pressure of the compressor.
Set drive depth with bottom retaining clip
You can set the drive depth of the fastener into the carton material by
adjusting the bottom retaining clip.
► To reduce the drive depth, loosen the cap screw (1) and adjust
the bottom retaining clip (2) downward.

To increase the drive depth, loosen the cap screw (1) and adjust
the bottom retaining clip (2) upward.