Preparing
the tacker
21
CAUTION
Operation with compressed air systems that do
not meet the above conditions can cause damage
to the tacker.
Operate the tacker only with a suitable compressed air
system.
Use the tacker only if it is flawless condition.
Check the condition of the tacker (see page
Fehler! Textmarke
nicht definiert.
).
Remove the plug from the connector for the air hose.
Check the connector for the air hose for foreign objects and dirt,
and clean it if needed.
Set the operating pressure at the pressure regulator on the
compressor to 5
–8.3 bar.
WARNING
Accidentally triggering when connecting to the
compressed air supply can cause severe or fatal
injury.
Do not point the tacker at people or animals.
Empty the magazine before connecting.
CAUTION
Damaged air lines can burst and cause injury.
Check the compressed air system and the tacker for damage
before connecting.
Connect the tacker only to a functioning compressed air
system.
Summary of Contents for 1A-AZ16BNH
Page 28: ...Eintreibger t bedienen 4C WZ38BNH 4C WZ38BNH400 28...
Page 47: ...Nach dem Betrieb 47 Schlie en Sie das Magazin siehe Seite 29...
Page 117: ...After operation 47 Close the magazine see page 28...
Page 137: ...Technical data 67 Noise characteristics per DIN 12549 1999 LWA 1s 95 3 dB LpA 1s 82 3 dB...
