Tacker
operation 4C-WZ38BNH / 4C-WZ38BNH400
33
Check drive depth
Set the tacker so that the carton is between the discharge and the
die.
Press the die against the carton.
Press the trigger through the stroke.
The discharge contacts the carton.
One fastener is driven through the carton and bent at the die.
Check the setting by triggering once on the sample material (see
page
Fehler! Textmarke nicht definiert.
).
Repeat these steps until the desired drive depth has been set.
Summary of Contents for 1A-AZ16BNH
Page 28: ...Eintreibger t bedienen 4C WZ38BNH 4C WZ38BNH400 28...
Page 47: ...Nach dem Betrieb 47 Schlie en Sie das Magazin siehe Seite 29...
Page 117: ...After operation 47 Close the magazine see page 28...
Page 137: ...Technical data 67 Noise characteristics per DIN 12549 1999 LWA 1s 95 3 dB LpA 1s 82 3 dB...
