After
operation
46
After operation
After operation, or in case of longer interruptions in operation,
perform the following steps.
Disconnect the air supply
Remove compressed air hose
Pull the quick-connect on the compressed air hose away from the
plug nipple.
The quick-connect is now unlocked.
Pull the compressed air hose off of the tacker connector.
The compressed air in the tacker escapes audibly.
Empty the magazine
Remove the unused fasteners from the magazine when you are no
longer using the tacker.
To do so, proceed as follows:
WARNING
Accidentally triggering when emptying the
magazine can cause severe or fatal injury.
Disconnect the tacker from the
compressed air supply (see page
Fehler!
Textmarke nicht definiert.
).
Open the magazine (see page 26).
Slide the fasteners (5) remaining in the magazine back out of the
inlet.
Remove the fasteners remaining in the magazine (2).
Summary of Contents for 1A-AZ16BNH
Page 28: ...Eintreibger t bedienen 4C WZ38BNH 4C WZ38BNH400 28...
Page 47: ...Nach dem Betrieb 47 Schlie en Sie das Magazin siehe Seite 29...
Page 117: ...After operation 47 Close the magazine see page 28...
Page 137: ...Technical data 67 Noise characteristics per DIN 12549 1999 LWA 1s 95 3 dB LpA 1s 82 3 dB...
