Preparing
the tacker
19
Check condition
WARNING
Risk of injury when operating a damaged
tacker or if accessories are not attached
correctly.
Check the condition of the tacker before
each use.
Make sure the tacker is not damaged.
Check the following points in particular:
-
All parts of the tacker and all accessories must be attached
securely.
-
The safety equipment must not be blocked or otherwise
hindered in function.
-
The spring on the trigger safety must not be damaged.
-
No part of the tacker or accessories may show external
damage such as scratches or dents.
-
The hose must be undamaged.
Scratches on the paint of the housing or the magazine are not
damage.
Do not connect a damaged tacker to an air supply.
If the tacker is damaged, have it repaired by technical personnel
before resuming use.
Connect tacker to air supply
You can connect the tacker to a compressor or a compressed air
system.
Summary of Contents for 1A-AZ16BNH
Page 28: ...Eintreibger t bedienen 4C WZ38BNH 4C WZ38BNH400 28...
Page 47: ...Nach dem Betrieb 47 Schlie en Sie das Magazin siehe Seite 29...
Page 117: ...After operation 47 Close the magazine see page 28...
Page 137: ...Technical data 67 Noise characteristics per DIN 12549 1999 LWA 1s 95 3 dB LpA 1s 82 3 dB...
