Preparing
the tacker
24
CAUTION
Operation with compressed air systems that
do not meet the above conditions can cause
damage to the tacker.
Operate the tacker only with a suitable
compressed air system (see page 23).
Use the tacker only if it is flawless
condition (see page
Fehler! Textmarke
nicht definiert.
).
Set the operating pressure at the pressure regulator on the
compressor to a maximum of 8.3 bar.
Check the connector for the pressure hose and the quick-connect
on the pressure hose for foreign objects and dirt, and clean them
if needed.
WARNING
Accidentally triggering when connecting to the
compressed air supply can cause severe or
fatal injury.
Do not point the tacker at yourself, people
or animals.
Empty the magazine before connecting
(see page
Fehler! Textmarke nicht
definiert.
)
WARNING
Damaged air lines can burst and cause injury.
Check the compressed air system and the
tacker for damage before connecting.
Connect the tacker only to a functioning
compressed air system.
Summary of Contents for 1A-AZ16BNH
Page 28: ...Eintreibger t bedienen 4C WZ38BNH 4C WZ38BNH400 28...
Page 47: ...Nach dem Betrieb 47 Schlie en Sie das Magazin siehe Seite 29...
Page 117: ...After operation 47 Close the magazine see page 28...
Page 137: ...Technical data 67 Noise characteristics per DIN 12549 1999 LWA 1s 95 3 dB LpA 1s 82 3 dB...
