Faults
58
Symptom
Potential cause
Remedy
Triggering is not
possible.
Operating pressure is
too low.
Increase the operating
pressure of the
compressed air system
to the maximum
permissible operating
pressure.
Increase the operating
pressure at the tacker to
the maximum permissible
operating pressure.
Then trigger several
times.
If triggering works, set to
the desired operating
pressure (see page 32).
Moving parts are stuck
with lubricant after a
long period of storage.
Clean the tacker and
apply oil
(see page
Fehler!
Textmarke nicht
definiert.
).
Set maximum operating
pressure.
Then trigger several
times.
If triggering works, set to
the desired operating
pressure (see page 32).
Otherwise, inform
customer service
(see page
Fehler!
Textmarke nicht
definiert.
).
Summary of Contents for 1A-AZ16BNH
Page 28: ...Eintreibger t bedienen 4C WZ38BNH 4C WZ38BNH400 28...
Page 47: ...Nach dem Betrieb 47 Schlie en Sie das Magazin siehe Seite 29...
Page 117: ...After operation 47 Close the magazine see page 28...
Page 137: ...Technical data 67 Noise characteristics per DIN 12549 1999 LWA 1s 95 3 dB LpA 1s 82 3 dB...
