
10 Dismounting and decommissioning
When the control unit has reached the end of its service life it must be
dismounted and disposed of in an environmentally responsible
manner.
Personnel:
n
Qualified personnel
1.
Ensure that the machine connected to the control unit rests in a
safe state.
2.
Disable the external power supply.
3.
Disconnect the power supply cable.
4.
Disconnect all input, output and interface wiring.
5.
Secure the control unit against unwanted movement.
6.
Loosen the screws that fix the control unit inside the cabinet.
7.
Dismount the control unit.
Electronic components are considered special waste. They must be
properly disposed of.
Power Automation will accept the control unit to properly dispose of its
components upon decommissioning.
To return the control unit follow the instructions given in
“Return policy and procedure” on page 121.
Environmental hazard caused by incorrect handling!
Incorrect handling of environmentally hazardous substances,
especially incorrect waste disposal, can cause considerable
damage to the environment.
Dismounting
Decommissioning
L
CAUTION
PA 8000 LW CNC control unit
Dismounting and decommissioning
25.09.2015 | 125
Summary of Contents for PA 8000 LW Series
