power automation PA 8000 LW Series, Installation Instructions Manual, Page: 64 / 132

3.6 PC connectors
The control unit provides a number of standard PC interface connec-
tors for various input and output applications (see Fig. 36).
Fig. 36: Overview PC connectors
1 Main power supply (X1)
2 Operator's panel keyboard cable
3 PS2, 6 pin mini DIN, connector for mouse, female
4 Connector CNC operator's keyboard (X3)
5 USB 2.0 connectors (optional)
6 USB 2.0 connectors (optional)
7 Serial port connector, COM1, Sub-D 9 pin male
(X5c)
8 Serial port connector, COM1, Sub-D 9 pin male
(X5b)
9 PA SDI-Interface (X21)
10 Protective earth, ground screw (X2)
11 PAMIO Connector (X13)
12 Safety Connector (X19)
13 Ethernet connector RJ 45
14 USB 2.0 connectors
15 DVI Connector (X4)
16 VGA connector, Sub D 15 pin female (X4)
17 Serial port connector, COM1, Sub-D 9 pin male
(X5a)
18 PS2, 6 pin mini DIN, connector for keyboard,
female
Hardware configuration subject to change
– For information on the applicable number of interfaces see the
specification provided in the sales records.
Due to varying configurations of the mainboards produced by the sup-
pliers, the number and positions of USB, serial and parallel ports may
differ from the example provided in this installation manual.
Overview
PA 8000 LW CNC control unit
Design and function
25.09.2015 | 64