power automation PA 8000 LW Series, Installation Instructions Manual, Page: 16 / 132

2.5 Personal protective gear
Wearing of personal protective gear is required to minimize health haz-
ards and damage when working with the control unit.
n Always wear the protective equipment that is necessary for the
respective task when working.
n Follow the instructions on personal protective equipment that are
listed in this installation manual and other installation manuals pro-
vided by Power Automation.
n The environment in which the control unit is installed may require
users to wear additional personal protective gear.
Observe the instructions on personal protective gear provided by
the operating company.
Antistatic gloves
for protection of the hands during the work. Wear the antistatic gloves
always until the work is finished.
ESD clothing
for protection of components susceptible to electrostatic discharge.
Wear the ESD clothing during the work on electrostatic components.
ESD safety pad
for protection of components susceptible to electrostatic discharge. Put
the ESD safety pad on the floor before starting to work.
ESD safety shoes
for protection of components susceptible to electrostatic discharge.
Wear the ESD safety shoes to protect electrostatic-discharge-sensitive
devices due to inadequate derivative electrostatic energy.
Ear protection
for protection of the ears during the work. Wear the ear protection
always until the work is finished.
Ground strap
for protection of components susceptible to electrostatic discharge.
Wear the ground strap on your wrist and connect it to a suitable
equipotential bonding.
Protective glasses
for protection of the eyes during the work. Always wear the protective
glasses until the work is finished.
2.6 Specific dangers
The following section lists the residual risks.
PA 8000 LW CNC control unit
Safety
25.09.2015 | 16