power automation PA 8000 LW Series, Installation Instructions Manual, Page: 65 / 132

n Always use the line cable delivered with the control unit.
n Ensure, that the line cable is only connected to either 115 V AC or
230 V AC .
n Ensure, that the power supply of the control unit is protected by an
external fuse type 2A MDL (at 230 V AC) or
4A MDL (at 115 V AC) .
Fig. 37: Power supply connector
Power supply properties
Property Value Unit
Voltage 115 - 240 V AC
Tolerances +10 / -15 %
Frequency 50 - 60 Hz
Maximum current (at 115 V) 4 A
Maximum current (at 230 V) 2 A
Maximum power consumption 180 W
Damage to the control unit!
Supply voltages not supported can cause damage to the control
unit.
(X1) Main Power Supply (1)
NOTICE
PA 8000 LW CNC control unit
Design and function
25.09.2015 | 65