power automation PA 8000 LW Series, Installation Instructions Manual, Page: 60 / 132

n Pin 1 and 2 are connected internally.
n Pin 4 and 5 are connected internally.
n Reference for all is pin 3 (0 V).
n With pins 1 and/or 2 and pins 4 and/or 5 the output bytes are sup-
plied separately. The two output bytes can be supplied
independently from each other.
This allows, for example, power to be supplied independently to
each byte in case of an emergency stop.
– Establish wire connections to both pins 1/2 and 3/4 respectively.
For proper load balancing across pins, connections to all available pins
per output byte are recommended.
– Consider that the power supply cable for each output byte has to
be chosen accordingly.
The current limitation of each output is 0.7 - 2.5 A per pin in case of
short circuits.
Notes
PA 8000 LW CNC control unit
Design and function
25.09.2015 | 60