power automation PA 8000 LW Series, Installation Instructions Manual, Page: 67 / 132

The Ethernet connector allows connection of the control unit to local
area networks.
Fig. 39: Ethernet connector (RJ 45)
Malfunctions and damage to the control unit!
The control unit provides two RJ 45 connectors. One is located
on the PC interface panel (Fig. 36/13) and only intended for
Ethernet connections. The other RJ 45 connector (Fig. 36/9) is
located next to the PAMIO superbus connector. Inadvertent inter-
changing of the two connectors can cause control unit malfunc-
tions and damages to the control unit and the attached drives.
n When setting up the wiring, carefully observe the connectors' posi-
tions given in this installation manual as well as the labels on the
control unit.
Property Value
Pins 8
Connector type RJ 45
Max length 100 m (328 ft)
Pin (Fig. 36) Ethernet 10/100 BaseT
1 TX+
2 TX-
3 RX+
4
5
6 RX-
7
8
Ethernet Connector (13)
NOTICE
PA 8000 LW CNC control unit
Design and function
25.09.2015 | 67