power automation PA 8000 LW Series, Installation Instructions Manual, Page: 121 / 132

ACE Automation
A-721, Twinrex B/D
Deokpungdong-ro 111-10, Hanam-si
Gyeonggi-do, 465-831
South Korea
9.2 Spare parts
Due to the high quality of our products we can assure you that you will
not need this service often. Spare parts are often urgent so Power
Automation provides the relevant spare parts at the local service cen-
ters for immediate dispatch.
Our 3 service centers in Europe, North America and Asia allow us to
deliver all needed parts typically within 24 hours.
Only trust PA's original parts - because every part passes our tight
quality checks.
We also offer consulting services to identify the most critical parts for
the machines in your production facilities. We suggest what critical
stock may be required to ensure a minimum downtime of your
machines. Our specialists look for common parts to keep your inven-
tory levels at a minimum.
9.3 Return policy and procedure
Power Automation will only accept control units and components for
replacement or repair, if they have been returned in adherence to the
provisions given below.
n If material warranty is void or if no error is detected, a testing flat
rate will be charged. If an error is determined, the testing flat rate
will be charged to the repair costs.
n If material warranty is void you will receive a repair offer.
n Before the repair starts we need a repair order from you, if the
material warranty is extinguished.
Spare Parts
Policy
PA 8000 LW CNC control unit
Service and return process
25.09.2015 | 121