Pottinger VITASEM A 251 Operator'S Manual Download Page 31 | Manualshive

Page: 31 / 82

background image

- 31 -

0800-GB Sämonitor_837

GB

MULTiTrOniC

1)

Only for AEROSEM, TERRASEM

„MULTI

tronic“

Sowing Monitor

Useful Features

The Multitronic II – sowing monitor is a compact on-board computer with many useful features. It manages important control and monitoring
tasks and simplifies operation by providing help functions and easy to understand displays.
The sowing monitor was designed for compatibility. It may be used for the mechanical drill series „

VITASEM

“ and for pneumatic drill series

„AEROSEM, TERRASEM“

.

Here is a short overview of its useful features:
Control:

-  Tramlining
-  Setting additional tramline markers
-  Automatic or manual switching of tramlining cycle
-  Interruption of automatic switching of tramlining cycle (when driving around obstacles)

Display:

-  Tramlining cycle and rhythm display
-  Sub-total area hectare meter
-  Total area hectare meter
-  Speed
-  Sowing shaft rotation
-  Fan unit turning speed

1)

Monitor:

-  Sowing shaft
-  Seed level
-  Fan unit monitoring

1)

Help Functions:

-  Sensor test
-  Calibration for the calculation and counting of hand crank rotations
-  Calibration of hectare meter (adapting hectare meter to soil conditions)
-  Adjustable delay for automatic switching of tramline rhythm
-  Language selection for menu; German, French, English
-  Switching the control signals
-  Onboard voltage display

Installation Instructions

Mount the monitor in the tractor cabin.
Power supply: 12 V from -pole socket for constant current (if this is not installed, a battery connection cable with a socket or an adapter for
the 7-pole trailer socket (parking light must be switched on) may be ordered from PÖTTINGER; see Parts List).

Fuse:

integrated into plug – re-activates automatically after maintenance followed by power up.

Connect the cable to the seed drill. Take strain off connection). If the cable to the „VITASEM, AEROSEM, TERRASEM“ is too short, an extension
is available as additional equipment.

Commissioning of Sowing Monitor

The Multitronic II sowing monitor is switched on by inserting the power supply plug into the socket.
After a short acoustic signal the selected machine type appears on the display for approx. 2 seconds:

for

VITASEM

series or

for

AEROSEM

series.

for

TERRASEM

series.

Note!
If the wrong machine type is displayed, set to the correct type
- see operator’s manual

“Multitronic II”

This is essential for correct operation.

«
...
29
30
31
32
33
...
»

Summary of Contents for VITASEM A 251



















































































Reviews:

No comments

Related manuals for VITASEM A 251

Brand: GALLERY Pages: 18

Brand: Rainbow Pages: 18

Brand: Echo Pages: 6

Pro Attachment Series

Brand: Echo Pages: 28

Brand: Echo Pages: 2

Pro Vantage 12+ Series

Brand: Ecco Pages: 6

Brand: Kellfri Pages: 12

Brand: Tascam Pages: 78

MINISTUDIO CREATOR US-42

Brand: Tascam Pages: 11

Brand: LSI Pages: 24

Brand: Jefferson Pages: 2

Brand: Lighthouse Pages: 2

INTEGRA ARINC e-NAV

Brand: Kannad Pages: 20

Brand: T&R Pages: 26

The Huntington Raised Planter Bed

Brand: Eden Pages: 2

Brand: Lightolier Pages: 2

Bernardo 1320 S

Brand: PWA Pages: 12

Brand: PFM Medical Pages: 26

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands