- 20 -
000-GB DOSIERVERFAHREN_8537
rEgUALTing SYSTEM
GB
(* additional equipment
Rotating Agitator
Agitator off - Plug in bore (
36/0
,
35/0
)
Agitator on - Plug in bore (
36/1
)
For rape seed, always switch agitator off.
Also switch „Rotating agitator“ off for grass and
bring agitator arms into upright position.
Agitator
Steep hopper walls and the smooth feed funnels ensure consistent
seed flow.
Use agitator shaft for extremely „sticky“ seed stock only:
- Self-aligning agitator shaft or
- rotating agitator.
Self-aligning Agitator Shaft -
3 settings
1. Agitator off - Plug (
32/1
) in bore (
34/0
),
2. Long path - Plug in bore (
34/1
= same direction as „0“), lever in
slit / right to limiter (
32/2
),
... for non-flowing grass/grass mixture.
. Short path - Plug in bore (
34/2
), lever in slit /left to limiter (
33/1
),
... for large, clogging seed.
To change lever setting, loosen both screws (
32/3
) - and re-
tighten.
In the „long path“ position, ensure a distance of
6 mm
between agitator hook and sow casing wall when fully extended
(
32/4
) – secure the agitator elements in the appropriate positions
on the shaft.
In the „short path“ position the short agitator arms will point
downwards.
In the „Agitator shaft off“ position turn the agitator until the long
agitator arms rest against the front wall of the hopper.
2
4
5
6
Spur wheel
Sowing is driven by a spur wheel, which runs on the surface to be
worked. The pressure with which it presses onto the ground may be
set by adjusting the spring tension.
