0800-GB VITASEM Multitronic
-
A
0 -
MULTiTrOniC ViTASEM
GB
2 Operating features of the seed drill monitor
2.1 Electrical connection
Power is supplied to the seed drill monitor from the tractor’s 12V electrical system via a DIN 9680 plug connection. These three-pin
plugs also exist in two-pin format, as only the two main terminals (+12V, earth) are required here.
On request, the seed drill monitor can also be fitted to operate via an ISO 11786 signal socket.
Attention!
Other types of plugs and plug sockets are not permitted, as functional safety cannot be guaranteed.
2.2 Technical data
Operating voltage:
+10V ......+15V
Power consumption of the seed drill monitor:
70 mA
Operating temperature range:
-5°C ...... +60°C
Storage temperature:
-25°C .... +60°C
Protection rating:
IP65
Fuse:
6A multi-fuse in power supply plug
The circuit breaker resets itself automatically, once the short circuit has been dealt with and after a delay period of approx. 2 min has
passed.
LCD unit:
Four-line back-lit display
2.3 Operating functions
The Multitronic II seed drill monitor is a compact on-board computer, which carries out a number of useful functions. It helps run
important control and monitoring functions, providing practical display and system utility functions designed to simplify operation and
save work.
The monitor is designed as a highly versatile unit, suitable for trouble-free application throughout both the ”VITASEM” range of mechanical
seed drill machines and the AEROSEM / TERRASEM range of air-operated units.
There now follows a brief overview of these operating functions:
Control functions:
- Tramline setup
- Additional tramline marking setup
- Automatic or manual relaying of tramline cycles
- Interruption of automatic relaying of tramline cycles driving in order to drive around obstacles
Display functions:
- Tramline cycle and tramline rhythm display
- Partial surface area hectare meter
- Total surface area hectare meter
- Drive speed
- Sowing shaft revolutions
Monitoring functions:
- Sowing shaft monitoring
- Hopper level monitoring
System utility functions:
- Sensor test
- Calibration assistance for calculation and inclusion of crank handle revolutions
- Calibration of hectare meter (adaptation of hectare meter to ground conditions)
- Adjustable time delay for automatic relaying of tramline cycle
- Menu language selection in English, German or French
- Switching the sensor signals
- Onboard voltage display
