- 36 -
0100-GB WARTUNG_8531
MAinTEnAnCE
GB
78
79
80
Maintenance
Before working on the hitched machine, turn off the engine and
remove ignition key!
Do not work on a raised seed drill!
If working on a raised drill is necessary, use additional safety supports
to prevent unintentional lowering!
De-pressurize the hydraulic system before commencing any work!
Ensure proper disposal of oil! (Hydraulics oil is mineral based).
Retighten all screws after initial operation (approx. 8 hrs),
then check at regular intervals.
Grease all bearings, including the disk bearings of the row marker
and the tramlines markers approx. every 50 running hours (lithium-
based multi-purpose grease).
Check the oil level in the transmission – oil stick (
78/1
). Permanent
fill – filling amount: 2.5 l – if oil needs to be refilled use: Hydraulic
Oil HLP 2.
Grease chain drives.
Maintain the movement of joints, spindles and sowing roller sleeves
(
73/2
– for tramlining control).
(Do not oil the sowing shaft or seed-pipes).
Retighten the chain drives – at (
79/1+2
),
or, for agitator see pages 12+1 (
32/5
or
35/5
);
For disc coulters, keep the discs clean and check the scrapers.
Check the hydraulic pipes at regular intervals and replace if damaged
or worn (see Spare Parts List). Pipes deteriorate naturally with age.
Do not use for more than 5-6 years.
When cleaning with a water jet (especially high-pressure), do not
point directly at electrical components (e.g. magnet couplings, cable
connections) or bearings (e.g. single-disc coulter bearings).
Retouch any damage to paint.
Use a damp cloth and mild household detergent to remove any dirt
on the „Multitronic“ keyboard. Do not immerse the casing in liquid!
