- 60 -
0600_GB-Power-Control_8537
GB
POWEr COnTrOL - OPErATiOn
Seed reference
• Select “Seed reference” using arrow keys
- Confirm with OK
• Select “Seed” using arrow keys
- The arrow always points at the last processed and
with that active seed.
- Select seed with OK or process adjustments.
(OK must possibly be pressed for a few seconds
until the parameter indicator appears.)
The seed reference contains 15 various seed types that the
user can alter as desired (12 seed types are preset).
The following information is assigned per seed:
Name:
max. 15 characters
Quantity:
in kg/h
Density:
in kg/dm
Nominal speed: in rpm
- If the arrow is moved onto a parameter and OK is
pressed, then this can be altered.
- To save the alteration, press OK until an acoustic signal
is heard.
- In the seed menu and calibration menu (Abdrehmenü)
the last processed seed is always activated.
Alteration in %
• Select “Alteration in %” using arrow keys
- Confirm with OK
- The percentage can be adapted to the relevant
needs.
- In the seed menu the user has the possibility to raise
or lower the seed quantity by a certainpercentage.
- The value can be altered using the +/- keys, and be
saved by pressing long on the OK key.
Electronic seed quantity adjustment
Press
“Special menu” key
• Base setting menu appears
- Select menu level using arrow keys
Seed quantity adjustment
- Confirm with OK
• Select “ON” using arrow keys
- Confirm with OK
(If “OFF” had been previously selected, OK must
be pressed until an acoustic signal is heard.).
Calibrate servomotor
• Select “Calibrate servomotor” using arrow keys
- Confirm with OK
• The servomotor is adapted to the gearing
- The instruction “Please turn crank handle!” appears
(please turn handle)
- Now turn the crank handle at the gearing front
end.
- The gearing movement is registered through the
hectare meter sensor.
- The servomotor comes up to the upper stopper and
saves this value.
- Then the lower stopper is reached and the value at
that point is saved.
- After that the actual gearing position is arrived at,
which equals the desired seed quantity.
- Calibration is finished
- Finish crank handle rotations and exit the menu with
ESC.
Note!
with help from the
electronic seed
quantity adjust-
ment, the seed
quantity can be
adjusted exactly
from the tractor
seat in comfort.
- Gear lever adjust-
ment takes place
through an electro
cylinder.
- Before the seed
quantity adjust-
ment can be used
for the first time,
the control must
be calibrated
with the electro
cylinder.
- This is achieved
through the “Cali-
brate the servo-
motor” function.
