Porsche 911 TURBO - 1975 WORSHOP, Manual

Page: 73 / 252

Controls, Safety, Instruments
73
A - Adjustment button for clock
B - Clock
C - Outside temperature display
Clock
The clock is blanked out approx. 4 minutes after
the ignition is switched off or when the car is
locked.
Setting the time
Warning!
Risk of accident when setting the clock whilst
driving. You may lose control of the vehicle.
f Do not reach through the steering-wheel
spokes while driving.
f Switch on ignition.
Setting hours
f Press adjustment button A for approx.
1 second.
Hour display flashes.
f
Turn button in the appropriate direction:
to the right – increase hours figure
to the left – decrease hours figure
Adjustment in hours –
turn button briefly
Fast adjustment (display cycles) –
turn and hold button
Setting minutes
f Press adjustment button again.
Minutes display flashes.
f Set by turning as in hours mode.
Leaving adjustment mode
Automatically after one minute or:
f Press adjustment button again.
When adjustment mode is deliberately left by
pressing the button, the time begins precisely to
the second.
Note
The time mode can be changed between 12h and
24h in the on-board computer.
Outside Temperature
The outside temperature display C is not an ice-
warning indication.
The road surface may be icy even if temperatures
above 0 °C are displayed, especially on bridges
and shady sections of road.