Porsche 911 TURBO - 1975 WORSHOP, Manual

Page: 60 / 252

60
Controls, Safety, Instruments
0 - Initial position
1 - Ignition on
2 - Start engine
3 - Ignition off
Ignition Lock/Steering Lock
The ignition lock has a total of four ignition lock
positions.
The vehicle key rebounds to the initial position
from every ignition lock position.
Ignition lock position 0
Initial position
The ignition key cannot be withdrawn when the
ignition is switched on or when the engine has
been started.
To withdraw the ignition key:
f
Stop the vehicle.
f On vehicles with Tiptronic S:
Move Tiptronic selector lever to position P .
f Switch ignition off.
f
Remove ignition key.
Ignition lock position 1
Ignition on
f Turn ignition key to position 1 .
Ignition is switched on.
Note on operation
All electrical equipment can be switched on.
f Please observe the chapter “WARNINGS ON
THE INSTRUMENT PANEL AND THE ON-
BOARD COMPUTER” on page 106.
Ignition lock position 2
Start engine
f Turn ignition key to ignition lock position 2 .
f Please observe the chapter “STARTING AND
STOPPING THE ENGINE” on page 62.
Ignition lock position 3
Ignition off
f
Turn ignition key to ignition lock position
3
.
Locking the steering column
Automatic locking
The steering column is automatically locked when
the ignition key is withdrawn from the ignition lock.
f
Withdraw the ignition key only when the
vehicle is stationary, otherwise the
steering lock engages and the vehicle
cannot be steered.
f When leaving the vehicle the ignition key
must always be removed .
Automatic unlocking
The steering column is automatically unlocked
when the ignition key is inserted into the ignition
lock.