Porsche 911 TURBO - 1975 WORSHOP, Manual

Page: 138 / 252

138
Controls, Safety, Instruments
1, 2, 3 - Programmable buttons
A - Light-emitting diode for status identification
HomeLink
The programmable HomeLink replaces up to three
original hand-held transmitters used to operate
various devices (e.g. garage door, gate to the
property, alarm system).
You can program buttons
1 to 3 with a frequency
of an original handheld transmitter.
Warning!
Risk of accident when using the HomeLink if
persons, animals or objects are within the
range of movement of the equipment that is
being operated.
f
When using the HomeLink, ensure that no
persons, animals or objects are within the
range of movement of the equipment that is
being operated.
f Observe the safety notes for the original hand-
held transmitter.
Preconditions for operating and
programming the HomeLink:
– Ignition is switched on.
– Fog lights are switched off.
To operate the respective device:
f Press the appropriate button ( 1, 2 or 3 ).
Light-emitting diode A lights up during signal
transfer.
Notes on operation
f Always use the HomeLink opener in the
direction of travel.
Otherwise, range restrictions cannot be
ruled out.
f
Before selling the vehicle, delete the
programmed signals of the HomeLink.
f Please read the instructions for the original
hand-held transmitter to find out whether the
original transmitter is equipped with fixed or
changeable code.