ēno play
8. Add a cable tie holder 2” (50mm) from the oval cable passage in the lift system that is closest
to the amplifier and capture the cable, ensuring a service loop between the amplifier and the
cable tie:
•
ēno 2610 requires 27” (685mm) audio and power service loop
•
ēno 2810 requires 35” (889mm) audio and power service loop
Note
: Service loops should not be in view of users.
9. Connect the cable to the amplifier.
10. Secure the cable to the whiteboard about 2” (50mm) from the amplifier using a cable tie and
tie holder.
To route power or permanent audio input to the amplifier from below the adjustable height lift
system:
1. Assure that the cable is long enough to allow for raising and lowering the adjustable height
system.
PolyVision
2002480-001 Rev C
25 of 38
