ēno play
To install the driver packs:
1. Add two driver pack spacers to each driver pack as follows:
•
Remove the self-adhesive backing from one of the circles on the driver pack.
•
Align the driver pack spacer with the circle of adhesive on the driver pack and press in place
for 15 seconds.
•
Repeat for the second driver pack spacer.
2. Slide the driver pack adapter mounting template to the upper left corner of the back of the
whiteboard and tape it in place.
Note
: The template has a front and back side. Be sure to use the template front in the upper
left corner.
PolyVision
2002480-001 Rev C
13 of 38
