ēno play
9. Reverse the template and tape it to the upper right corner of the whiteboard.
10. Repeat steps 1 through 8 to install the second driver pack.
Install the driver pack with driver pack offset kit
Important Note
: If your
ēno
classic whiteboard is mounted using some older adjustable
height mobile stands and adjustable height wall mounts, PolyVision provides driver pack
offset kit. If
ēno
play components include the driver pack offset kit, use the steps below
to install the driver packs.
!
Assure that your adjustable height lift system looks like the one shown below on the right
before installing the driver pack with the offset kit.
Offset kit not required
Offset kit required
Locate and have ready to use:
•
driver pack spacers (x4)
•
driver pack offset template
•
driver packs (x2)
•
alcohol wipes (x2)
•
tape
12 of 38
2002480-001 Rev C
Installation and Operation Guide