ēno play
Removing and replacing the cable tie holders, driver packs or amplifier
The adhesive backing on the driver packs and amplifier create a tight bond to the whiteboard.
Additional self-adhesive strips are provided in case you need to remove and replace a component.
To remove and replace a driver pack, amplifier or cable tie holder:
1. Insert a flat blade screw driver between the whiteboard and the adhesive.
2. Use firm, prolonged pressure to pry up the component.
3. Clean any residual adhesive from the back of the whiteboard using an appropriate cleaner and
a cloth.
4. Clean the new installation location using the alcohol wipes provided.
5. Install the component as instructed.
30 of 38
2002480-001 Rev C
Installation and Operation Guide
