Polycom RealPresence Group User Manual Download Page 57

Page: 57 / 120

RealPresence Media Suite Connection Methods

You can use any of the following connection methods for dialing the RealPresence Media Suite solution
to record calls on the RealPresence Group Series

Media Suite

Type

Connection Method

Example

Media Suite
system

If the room system and solution are not registered to
the gatekeeper or to a SIP server, dial the
RealPresence Media Suite IP address.

10.11.12.13

If the room system and solution are registered to the
gatekeeper, dial the RealPresence Media Suite E.164
extension for H.323.

1234

If the room system and solution are registered to a SIP
server, dial the RealPresence Media Suite SIP
address.

CS123

VRR

For H.323 calls, use one of the following:

• [RealPresence Media Suite IP]##[VRR

number]

• [RealPresence Media Suite E.164 prefix]

[VRR number]

If the RealPresence Media Suite IP
is 11.12.13.14 and the VRR
number is 4096, dial
11.12.13.14##4096.

If the RealPresence Media Suite E.
164 prefix is 8888 and the VRR
number is 4096, dial 88884096.

For SIP calls, use one of the following:

• [VRR number]@[RealPresence Media

Suite IP]

• [SIP peer prefix][VRR number]

If the RealPresence Media Suite IP
is 11.12.13.14 and the VRR
number is 4096, dial
[email protected].

If the SIP peer prefix of the
RealPresence Media Suite is 8888
and the VRR number is 4096, dial
88884096.

RealPresence Media Suite Touch Tones

You can enter touch tones with the touch interface, a touch device, or remote control to manage the call
recording.

The following table lists the supported touch tone codes you can use to activate the button controls on the

TVUI.

Using the Touch User Interface

Polycom, Inc.

Summary of Contents for RealPresence Group

























































































































Search results

Summary of Contents for RealPresence Group

Reviews:

Related manuals for RealPresence Group

Brands by name

Popular brands

Polycom RealPresence Group, User Manual

Search results

Summary of Contents for RealPresence Group

Reviews:

Related manuals for RealPresence Group

Brands by name

Popular brands