Administrator’s Guide for Polycom CX7000 Systems
14
Polycom, Inc.
3
Enter the Admin Password, and then enter it again to confirm it.
If the system signs in as a Domain Member, the admin password must
meet the password policy of the domain controller security settings.
System Location
You can customize the system language, date, and time settings.
To customize location settings:
1
Click
Options >
Configuration
.
2
Click
Advanced Settings
.
3
Sign in using the administrator account appropriate to your sign-in
mode:
—
Domain Member: local administrator or domain administrator
—
Standalone: local administrator
4
Click
Location
.
5
Configure these settings:
Changing this setting causes the system to restart. Do not power the system off
until the restart is complete.
Setting
Description
Language
Sets the language for the user interface. Changing this setting
causes the system to restart.
Time Format
Specifies your format preference for the time display.
Time Zone
Specifies the time zone for this location. Changing this setting causes
the system to restart.
Power
Frequency
Specifies the power line frequency for your system. In most cases,
the system defaults to the correct power line frequency, based on the
video standard used in the country where the system is located. This
setting allows you to adapt the system in areas where the power line
frequency does not match the video standard used. You may need to
change this setting to avoid flicker from the fluorescent lights in your
conference room.
Keyboard
Layout
Specifies the type of keyboard in use with this system.
