Polaris Scrambler 500 4x4 Page 88 Owner'S Manual Download

Page: 88 / 129

MAINTENANCE AND LUBRICATION

Adjustments

Toe Alignment

Use the following procedure to check the toe alignment of the vehicle.

The recommended toe alignment is 1/8

″

to 1/4

″

toe out.

1. Set the handlebars in a

straight-ahead position.

NOTE:

The steering frog

can be used as an indicator

of whether the handlebars are

straight. The frog should

always point straight back

from the steering post.

2. Place stands (1) in front of

the vehicle, perpendicular to

the rear tires. See

illustration.

3. Tie an elastic string around

the stands, making sure the

string just touches the side

surface of the rear tires on

each side of the vehicle and

goes around the stands in

front of the vehicle (2).

4. Measure the distance from

the string to the rim at the

front and rear of the front

rim (3). Rear measurement should be 1/16

″

- 1/8

″

(.2 to .3 cm)

more than the front measurement.

NOTE:

If you discover improper alignment, see your Polaris dealer

for service.

WARNING

Severe injury or death can result from improper toe alignment and

adjustment. Do not attempt to adjust tie rod alignment. All tie rod

adjustments should be performed by an authorized Polaris dealer.

Summary of Contents for Scrambler 500 4x4


































































































































Search results

Summary of Contents for Scrambler 500 4x4

Reviews:

Related manuals for Scrambler 500 4x4

Brands by name

Popular brands

Polaris Scrambler 500 4x4, Owner'S Manual

Search results

Summary of Contents for Scrambler 500 4x4

Reviews:

Related manuals for Scrambler 500 4x4

Brands by name

Popular brands