Polaris Scrambler 500 4x4 Page 90 Owner'S Manual Download

Page: 90 / 129

MAINTENANCE AND LUBRICATION

Adjustments

Brakes

1. Check the brake system for fluid leaks.
2. Check the brakes for excessive travel or

spongy feel.

3. Check the friction pads for wear,

damage and looseness.

4. Check the security and surface

condition of the disc.

NOTE:

Pads should be changed when

worn to 3/64

″

(.1 cm), or about the

thickness of a U.S. dime.

Auxiliary Brake

The auxiliary brake system is intended to be used as a backup for the

main brake system. Should the main system fail, the rear brake can be

activated by depressing the foot pedal on the inside of the right

footrest. The hydraulic auxiliary brake system requires no adjustment.

NOTE:

Since this is a rear brake only, it will not be as effective as the

all-wheel single lever system.

3/64

″

(.1 cm)

Summary of Contents for Scrambler 500 4x4


































































































































Search results

Summary of Contents for Scrambler 500 4x4

Reviews:

Related manuals for Scrambler 500 4x4

Brands by name

Popular brands

Polaris Scrambler 500 4x4, Owner'S Manual

Search results

Summary of Contents for Scrambler 500 4x4

Reviews:

Related manuals for Scrambler 500 4x4

Brands by name

Popular brands