Polaris Scrambler 500 4x4 Page 64 Owner'S Manual Download

Page: 64 / 129

OPERATION

Driving Safely

Driving Uphill

Whenever traveling uphill, follow these precautions:
1. Always travel straight uphill.
2. Avoid steep hills (25

maximum).

3. Keep both feet on the footrests.
4. Transfer your weight forward.
5. Proceed at a steady rate of speed and throttle opening.
6. Remain alert and be prepared to take emergency action.

This may include quick dismounting of the vehicle.

If all forward speed is lost:

Keep your weight uphill.
Apply the single lever brake, gradually. When fully stopped, apply the

auxiliary brake as well, then lock the park brake.

If the ATV begins rolling backwards:

Keep your weight uphill. Never apply engine power. Never apply the

auxiliary rear brake while rolling backwards.
Apply the single-lever brake, gradually. When fully stopped, apply the

auxiliary rear brake as well, and then lock the parking brake.
Dismount on uphill side, or to either side if ATV is pointed straight

uphill. Turn the ATV around and remount, following the procedure

described on page 63.

Summary of Contents for Scrambler 500 4x4


































































































































Search results

Summary of Contents for Scrambler 500 4x4

Reviews:

Related manuals for Scrambler 500 4x4

Brands by name

Popular brands

Polaris Scrambler 500 4x4, Owner'S Manual

Search results

Summary of Contents for Scrambler 500 4x4

Reviews:

Related manuals for Scrambler 500 4x4

Brands by name

Popular brands