STEP 25: MOUNT SWING BEAM TO SWING BEAM LEGS
1: FASTEN THE SWING BEAM TO THE SWING BEAM BRACKET USING 3/8" X 6-1/2" CARRIAGE BOLTS WITH
TORQUE WASHERS ON TOP OF THE SWING BEAM, AND 3/8" LOCK NUTS WITH 3/8: WASHERS FROM UNDERNEATH.
2: PREDRILL AN 11/64" HOLE THROUGH THE MIDDLE HOLE IN THE SWING LEG BRACKET INTO THE SWING BEAM
3-1/2" DEEP. DRIVE A 3/8" X 3-1/2" LAG SCREW WITH 3/8" WASHER INTO THE HOLE IN THE CENTER OF THE SWING
BEAM BRACKET.
3: PLACE A BOLT CAP OVER ANY EXPOSED THREADS.
3/8" LOCK NUT
BOLT CAP
3/8" X 6-1/2" CARRIAGE BOLT
TORQUE WASHER
3/8" WASHER
3/8" X 3-1/2"
LAG SCREW
54
