T-NUT
2 X 4 X 29"
2 X 4 X 73-1/2"
5/16" WASHER
REAR CENTER POST
FRONT CENTER POST
5/16" X 2-1/2" HEX BOLT
5/16" WASHER
5/16" X 2-1/2" HEX BOLT
#8 X 2-1/2" WOOD SCREWS
#8 X 2-1/2" WOOD SCREW
#8 X 2-1/2"
WOOD SCREWS
(GO UP ON
DECK AND
DRIVE THESE
FROM THE INSIDE
GOING OUT.)
1: FIRST ATTACH THE 2 X 4 X 73-1/2" FRONT CENTER POST AND 2 X 4 X 29" REAR CENTER POST TO THE TARP SUPPORT
BOARDS WITH 5/16" X 2-1/2" HEX BOLTS, 5/16" WASHERS, AND T-NUTS.
2: SQUARE THE THE FRONT CENTER POST TO THE DECK. ATTACH THE BOTTOM OF THE FRONT CENTER POST TO THE
DECK SPACER FROM UNDERNEATH WITH TWO #8 X 2-1/2" WOOD SCREWS. ATTACH THE FRONT CENTER POST TO
THE ARCH FACE BOARD ON THE INSIDE USING TWO #8 X 2-1/2" WOOD SCREWS.
3: SQUARE THE REAR CENTER POST TO THE REAR TARP SUPPORT BOARD. DRIVE TWO #8 X 2-1/2" SCREWS
THROUGH THE REAR CENTER POST INTO THE REAR TARP SUPPORT BOARD.
STEP 29: ATTACHING CENTER POSTS
58
