A
2 X 4 X 47-1/2"
FORT SIDE
SUPPORT
B
2 X 4 X 47-1/2"
FORT SIDE
SUPPORT
END SANDBOX BOARD
#8 X 2-1/2" WOOD SCREW
DETAIL B
#8 X 3" WOOD SCREW
ANGLED END OF FORT SIDE SUPPORT.
STEP 10: ATTACHING FORT SIDE SUPPORTS
1: LAY THE 2 X 4 X 47-1/2" FORT SIDE SUPPORTS ON A FLAT SURFACE WITH THE ANGLED ENDS ORIENTED THE WAY
THEY WILL BE INSTALLED ONTO THE FORT. PLACE A T-NUT IN THE PRE-DRILLED HOLE ON EACH END AND SECURE
WITH HAMMER. SEE DETAIL A.
2: THE 2 X 4 X 47-1/2" FORT SIDE SUPPORT (WITH ANGLED END) ATTACHES TO THE HOLE ON THE END OF THE
END SANDBOX BOARD ON THE INSIDE WITH 5/16 X 2-1/2" HEX BOLTS AND 5/16" WASHERS. THE ANGLED END
SHOULD REST FLUSH AGAINST THE CORNER POSTS. SEE DETAIL A AND DETAIL B.
3: ENSURE THAT THE TWO FORT SIDE SUPPORTS ARE ATTACHED PROPERLY TO THE END SANDBOX BOARD BEFORE
SECURING THEM TO THE CORNER POSTS. USE A #8 X 2-1/2" WOOD SCREW IN THE TOP HOLE OF THE SUPPORT,
THEN USE A 3" WOOD SCREW IN THE BOTTOM HOLE OF THE SUPPORT. SEE DETAIL B.
5/16" X 2-1/2" HEX BOLT
DETAIL A
5/16" WASHER
T-NUT
(INSTALL FIRST)
39
