STEP 11: ATTACHING THE ROCK WALL SUPPORTS
1: LAY THE 2 X 6 X 53-1/2" ROCK WALL SUPPORTS ON A FLAT SURFACE WITH THE ANGLED ENDS ORIENTED THE
WAY THEY WILL BE INSTALLED ONTO THE PLAY SET. PLACE A T-NUT INTO THE PRE-DRILLED HOLE ON THE END AND
SECURE WITH A HAMMER.
2: LINE UP THE HOLE IN THE BOTTOM OF EACH 2 X 6 X 53-1/2" ROCK WALL SUPPORT TO THE HOLE ON THE END OF
EACH SIDE SANDBOX BOARD. ATTACH EACH ROCK WALL SUPPORT TO THE SIDE SANDBOX BOARD WITH 2-1/2"
HEX BOLTS AND 5/16" WASHERS. THE ANGLED END OF EACH ROCK WALL SUPPORT SHOULD REST FLUSH
AGAINST THE CORNER POST.
3: ENSURE THAT THE TWO ROCKWALL SUPPORTS ARE ATTACHED PROPERLY TO THE SIDE SANDBOX BOARDS
BEFORE SECURING THEM TO THE CORNER POSTS. USE A #8 X 2-1/2" WOOD SCREW IN THE TOP HOLE AND A
#8 X 3" WOOD SCREW IN THE BOTTOM HOLE OF THE ROCK WALL SUPPORT.
5/16" WASHER
ROCK WALL SUPPORT
T-NUT
2 X 6 X 53-1/2"
5/16" X 2-1/2" HEX BOLT
#8 X 3"
WOOD SCREW
#8 X 2-1/2"
WOOD SCREW
40
