2: THE OUTER COUNTER-SUNK HOLES SHOULD BE OFFSET DOWN ON BOTH BOARDS.
3: THE SHORTEST END FROM THE COUNTER-SUNK HOLE WILL POINT TOWARD THE SWING BEAM SIDE OF THE FORT.
AND REAR CORNER POSTS WITH 5/16 X 4-1/2" HEX BOLTS AND 5/16" WASHERS.
1: THE 2 X 4 X 83" TARP SUPPORT BOARDS (WITH THE PRE-DRILLED HOLES) ATTACH TO THE TOP OF THE FRONT
5/16 X 4-1/2" HEX BOLT
(OFFSET DOWN)
2 X 4 X 83"
TARP SUPPORT
BOARD
5/16" WASHER
STEP 6: ATTACHING TARP SUPPORT BOARDS
35
