55°
1/4" GAP
STEP 35: SUNBURST
1: PLACE THE 5/4 X 6 X 13-5/8" WOOD SUN ON TOP OF THE TARP SUPPORT LEANING AGAINST THE CENTER POST,
MAKE SURE IT IS CENTERED AND SECURE IT WITH TWO #8 X 2" WOOD SCREWS.
2: ALL THE 5/4 X 4 X 10" WAVE SUN RAY PIECES GET INSTALLED ON THE INSIDE SURFACE OF THE WOODEN SUN.
3: INSTALL THE TOP WAVE SUN RAYS ABOUT 55 FROM THE CENTER POST AND SECURE WITH #8 X 1-3/4" WOOD
SCREWS.
4: PLACE THE BOTTOM WAVE SUN RAY BELOW THE TOP WAVE SUN RAY LEAVING A 1/4" GAP IN BETWEEN.
5: REPEAT SUBSTEPS 2 TO 4 FOR THE OTHER SIDE.
6: PLACE THE CROWN ON TOP OF THE FRONT WOOD SUN AND SECURE IT WITH TWO #8 X 1-1/4" WOOD
SCREWS.
CROWN
5/4 X 6 X 13-5/8"
WAVE SUN RAY
5/4 X 4 X 10"
CENTER POST
#8 X 2" WOOD SCREW
SUN
#8 X 1-3/4" WOOD SCREW
#8 X 1-1/4"
WOOD SCREW
64
