Check the drain valve
Check that the drain valve is fully closed before
attempting to fill the hot tub.
Attaching cover lifter
(Additional Extra)
Once the hot tub is in its final position, we
recommend attaching your cover lifter before you
fill your hot tub, to ensure enough clearance for the
lifter mechanism to operate freely. Do not place too
close to nearby walls. All cover lifters have different
clearance parameters.
Access in cabinet power supply
If the hot tub is a plug and play (13amp) hot tub, the
power cable will already be in place and therefore
no extra work is required. If the hot tub is a 32amp
(hard wired), this will require a cable wire to be
connected. If you would prefer for the cable to be
hidden, it may need to be drilled into one of the
corners or the base. This will need to be completed
by a professional.
Hot Tub prior to filling
Hot Tub equipment access
Please see step by step stages on how to remove
the cabinet panel to gain access to plumbing
location, electrical cabling conduit access to
power control box.
PREP
AR
A
TION
| 15
