Balboa SpaTouch3
Overview
Important information about spa operations can
be seen on the Main Screen. Most featuresmcan
be accessed from this screen.
For a more detailed interface manual please visit the
Support section on the
Balboa website
and select the
SpaTouch 3 manual.
Brands
Platinum Spas Hot Tubs
Onyx
Temperature
When the spa is powered On, four dashes appear in
the Water Temperature display for one minute. The
dashes indicate that the spa is checking the water
temperature. After the pump runs for 1 minute,
the dashes disappear and the water temperature is
displayed. The dashes may reappear after the pump
has not run for one hour.
Set Temperature
In this example we will set the Set Temperature to 102.
• Press the water temperature display button (A) to
make the temperature menu appear (B). The centre
box with the arrow (C) indicates the current Set
Temperature.
• If 102 is already showing, but just not centred (D),
touch it to centre it (E).
• If 102 is not showing (B), swipe the temperature
menu until 102 appears (D).
• If 102 appears after swiping but does not stop in
the centre box (D), press 102. Pressing 102 makes
it shift to the centre box (E).
• Press the water temperature display (A) to
make the temperature menu disappear. The Set
Temperature is now 102.
The center of the Heater Status icon turns red (F)
when the heater is On.
A
F
B
D
E
C
ENJO
YING
Y
OUR
HO
T TUB
OR
S
WIM
SP
A
Filter
Kepp your water clean and ready to enjoy.
Follow these steps to set the time for Filter Cycle 1.
• Press the Settings button (A) on the
Main screen.
• Press the Filter button (B) on the
Settings screen.
• Press the Start button (E) on the
Filter Cycles screen.
• Set the Start Time with these dials ( J ) on
the F1 End screen.
• Press the Save button ( K ) to save your
settings, or press the Cancel button ( I ) to
cancel your settings.
• Press the End button (F) on the Filter Cycles
screen, and follow the same steps to set the
End Time.
• Once the Start and End Times are set, press
the Save button (G) on the Filter Cycles screen.
• Once Start and End Times are set, the
Duration appears here (H). You have now set
the time for Filter Cycle 1. The white ring (C)
indicates that Filter Cycle 1 is enabled (it is
always enabled). Follow the same steps noted
above to set the time for Filter Cycle 2.
Main Screen Icons
A. Panel Sleep
B. Temperature Range
C. Heat Mode
D. Ozone Running:
E. Filter Cycles
F. Clean-up Cycle (Optional Feature)
G. Panel Locked and/or Settings Locked
H. WiFi (Local or Cloud Connection)
I. Time-of-Day
J. Set Temperature Arrow
K. Secondary Button/Display
L. Invert Display
M. Settings
N. Light
O. Spa
P. Heater Status
Q. Message Button (May Appear)
R. Water Temperature
S. Water Temperature Bar
A
B
G
K
K
H
D
C
E
F
J
I
J
H
F
G
E
D
C
B
A
P
P
N
M
L
K
R
S
Q
| 31
