MAINTENANCE
Disassembly and installation of filtration systems
Filtration system 1
• A filtration barrel with a water supply pipe is
installed under the filtration and each water hole
of the filter is connected with the pipe joint on
the filter basket tail. When disassembling the filter,
please unscrew the cover counter clockwise first,
then catch the handle in the filter basket and put
it in a suitable place for cleaning or replacing the
filter. A filtration barrel with water supply pipe is
installed under the filtration. When disassembling
the filter, please pull up the cover first and then
take out the filter core for cleaning or replacing it.
• When installing the filter, please catch the handle
on the filter and connect each water hole of the
filter with the pre-set pipe joint of the filtration
cabin. At the same time, press the filter down in its
place. Finally, install the cover. Before starting the
jet pump, please check whether the filter system is
perfectly installed.
Filtration systems 2
• A filtration barrel with a water supply pipe is
installed under the filtration. When disassembling
the filter core, please first pull up the filter net, take
out the filter basket and then the filter for cleaning
or replacing the filter.
• When installing the filter, please catch the
handle on the filter and connect each water
hole of the filter with a pre-set pipe joint of the
filtration cabin. At the same time, press the filter
down and then push the filter basket into its
place. At last, install the filter net. Before starting
the jet pump, please check whether the filter
system is perfectly installed.
Filtration systems 3
• When installing the filter, please press the filter
down in its place and then connect the screw
thread joint on the filter basket tail with each
water hole of the filter. After that, press the filter
basket down in its place. Before starting the jet
pump, please check whether the filter system is
perfectly installed.
Check the drain valve
To drain the spa:
• Twist the cap clockwise and pull out at the
same time (A)
• Once the plug is out fully you can then spin off
the cap anti clockwise (B)
• Screw on the hose pipe attachment. Connect the
hose, then push in half way to release the valve (C).
At this point the spa will start draining.
ENJO
YING
Y
OUR
HO
T TUB
OR
S
WIM
SP
A
| 41
A
B
C
